When you install a new buying ink cartridge, you’ll always find various problems, common ones are that no ink appear on the printed page, the ink cartridge is faulty, etc.
Today I will give you a summary of that and how to solve them.

  A  Indicating ink cartridge failure

1 Clean the contact point of the ink cartridge with an eraser

2 Clean the contacts of the corresponding ink cartridge on the printer


B No ink appears on the printed page

   1 Put a few layers of paper towels on the print head, shake the print head down a few times, then print to see whether it can be printed

   2 Soak the ink cartridge nozzles in warm water for 3-5 minutes

C  Indicating incompatible ink cartridge

Check the printer ink cartridge model is consistent with the purchased one

D  Recommended calibration
Click No Calibration, a dialog box will pop up to promt "Used Ink Cartridge", etc., then click OK to print normally； If you click Carlibration, the ink cartridge will be 
calibrated and print a test page, it can only be print after scanning, otherwise it will not be scanned when printing, a similar dialog box will not pop up.





Above are the common problems about ink cartridge, hope it helps